banner

CHIMNEY

Selkirk Chimney, Venting and Fireplaces

Inland Metal is one of the longest serving Selkirk Chimney distributors in Canada. 

Selkirk features a complete line of Chimney, Venting & Fireplace products to serve the Hearth Wholesale and Retail markets.

Gas Vent (RV 3” to 8” BV 8” to 48”) is for Natural Gas appliances

Flexi-Liner Aluminum Flexible Chimney Liner

Versa-Liner Stainless Steel Chimney re-lining system

Model CF Sentinel is for Wood Stoves and other Solid Fuel applications.

Model DSP Double Wall Stove Pipe

Ultra-Temp (5" to 14") is designed for Oil-fired or Gas appliances and specifically listed Built-In Wood Fireplaces.

4HT Chimney is a stainless steel insulated (1") chimney. Perfect for Oil Stove applications.

Industrial Class “A” Vent (ICA) is a large diameter chimney for use with high BTU Oil or Gas appliances.

Safe-T-Vent AL29-4C Special Gas Vent Systems

Z-3 Zero Clearance Grease Duct

PS or IPS Pressure Stacks and Diesel exhaust systems

Supervent is for wood stoves and other solid fuel applications

www.selkirkcanada.com

selkirk

 

Saf-T Vents

Saf-T Vent CI Plus

Saf-T Vent CI Plus is the leading commercial double-wall special gas vent system made from superferritic stainless steel. With increased airspace between the inner flue conduit and the outer jacket, today's CI Plus reduces the required clearance to combustibles and makes a more rigid flue pipe - large diameters are easier to handle.

Saf-T Vent SC

The Saf-T Vent® SC is a concentric vent system designed for zero clearance installation in residential and light commercial applications. It is approved for use on ANSI category I, II, III, and IV Gas-burning appliances, and direct vent or sealed combustion appliances approved by the appliance manufacturer.

Saf-T Vent EZ Seal

Now, the strongest special gas vent is also the easiest to install. With new integral seal, and patented Ring and Tab™ closure system, Saf-T Vent EZ Seal is the fastest and most reliable venting solution for Category I, II, III and IV gas appliances – with no RTV sealant required. Look inside. The red seal is your guarantee of Saf-T Vent quality – and performance you can depend upon.

Saf-T Vent GC

Saf-T Vent GC is a single-wall venting system fabricated from AL 29-4C® stainless steel. Designed for multiple applications, Saf-T Vent GC can be installed for use as Saf-T Vent Special Gas Vent, Saf-T Vent Gas Vent Connector, and Saf-T Vent Masonry Chimney Liner.

saf t vent

 

Flexi-Liner Aluminum Flexible Chimney Liner

Application:
Chimney Liner for Category I gas fired appliances approved for use with B-Vent or appliances equipped with draft hoods.

Approvals:
USA: UL 1777 Chimney Liners
Canada: ULC S635 Liners for Existing Masonry and Factory-Built Chimneys and Vents 

Specifications:

Liner Material

Aluminum 3003, 2-ply (0.005" each)

Maximum Flue Gas Temperature

470° F

Available Size Range

3" - 8" dia.
(Larger sizes available as Special Order) 

Kits

25' and 35' (15' Kits available for 3", 4", 5")

Stretch Ratio

5:1 (approx.)

Clearances

0" between liner and chimney interior
0" between combustible materials & chimney exterior 

Warranty

"Smart Choice" Lifetime Warranty

STRONG - DURABLE - FLEXIBLE - COMPRESSIBLE

 

Vera-Liner

Versa-Liner is the most versatile Stainless Steel Chimney re-lining system on the market. Use the same components with either Rigid or Flex. Wood, Oil, Coal, and Gas applications. Listings: ULC-S635, ULC-S640 in Canada, UL 1777 in USA.

versa liner

 

Ultra-Temp 4'' - 8''

ultra tempUltra-Temp is designed for Oil-fired or Gas appliances and specifically listed Wood Burning Fireplaces. Sizes: 4”, 5”, 6”, 7”, 8”. Insulation: 1" Solid Pack, Listings: ULC S-604, 610

 

 

 

Wood Fireplaces

640 wood fireplaceMAX! ZC Wood Fireplace

Zero Clearance, Factory-Built (pre-fabricated) Wood Burning Fireplace. Max! ZC features a full 36" Hearth opening, Firescreen, grilles and grate. 6" A-Vent provides an enhanced draft, reduced condensation and smaller framing size than air-cooled systems.

he 40 wood fireplaceMAX! HE Wood Fireplace

Feel the warm embrace of a clean burning wood fire. Low emissions are achieved through a High Tech design to reduce maintenance and cost. Max! HE contains many impressive design features, such as a Cast front face, Single or Double Door options and the ability to duct heat to other rooms.

lowerleft1
[Sheet Metal] [Chimney & Vent] [Equipment] [Other Products] [FAQ's] [Site Map]
lowerright

Please contact Inland Metal with any questions, comments or inquiries.
Copyright 2010. Privacy Policy. All rights reserved. Designed by Melcher Media & Design.